Can NutriBullets Overheat? (Safety, Diagnostic & Prevention Guide)
The NutriBullet has been around for well over ten years now and sells more than one million units each year. With so many different types of blenders on the market today, it seems as if there’s something new to try every week, or month. But we all know that NutriBullets are loved because of their great performance and reliability.
But are they flawless? I’ve recently heard about a stream of concerns from customers who’ve experienced their NutriBullets getting a little hot after use.
So let’s talk about the NutriBullet heat up.
Can the NutriBullet overheat?
A NutriBullet can certainly overheat. These are machines that do have a motor and, therefore, can overheat if they are used in a manner or for a time period that is different than what the manufacturer suggests as optimal use and time. A NutriBullet has an internal temperature regulator that will shut off the machine if it gets hotter than it should be. This will shut off the motor so that you have the chance to unplug your machine and allow it time to cool down.
A NutriBullet, though meant to be used to blend up nearly anything, can overheat if you are stressing it too much. If you are blending something that is frozen or that is harder to blend, if you are blending something that is very thick and that might stress the motor, or if you are using it for a longer period of time than the manufacturer suggests, you might run into a motor that is going to overheat.
The NutriBullet is built with a built-in temperature control that monitors the temperature of the motor while it is running. If the motor gets hotter than it should, the motor will shut off, which gives you the time to unplug it and allow it to cool down before you start using it again.
How to prevent the NutriBullet from overheating
If you are looking to figure out how to prevent an overheating, there are a few things that you can do.
First, avoid putting things in the blender that are very hard, like nuts, frozen foods, or other hard foods that might be difficult to blend.
Avoid overfilling your blender. This is going to allow you to blend for a shorter period of time. When you overfill, you have to blend longer to get the texture you want. By avoiding overfilling the blender, you are going to be able to blend for longer periods of time, reducing the chances that the blender will overheat.
You also need to pay attention to how long you are blending for. You want to blend in short bursts, rather than blending for a prolonged period of time.
Why does my NutriBullet overheat?
There are a few reasons why your blender might be overheating.
The first and most common is that you are running it for too long at a time or you are blending something that is very taxing on the motor, making it hard for the blender to keep up. This means that you are either overfilling the blender when you use it and therefore having to run it for longer than suggested to get the consistency you want, or you are putting foods in that are very thick, very hard, or that are not easy to blend up.
Overheating may also be a sign that you have some parts that are worn out and need to be looked at.
Why did my NutriBullet just stop working?
There could be a few different causes for your blender not working.
The first possible issue is that the blades are jammed. NutriBullets are made with a range of safety features built in to protect you and the machine.
If the blades are jammed, for instance, the machine will not work.
If any water or moisture has gotten into the motor, it will not work.
If the motor is too hot, it will not work. You should do a run down of issues if your blender is not working and see what might be causing the issue.
There is also a chance that parts are just worn out and need to be replaced. You may be able to get your blender fixed under warranty depending on what is wrong with it.
The NutriBullet’s power cord is damaged
Perhaps one of the more frequent issues with NutriBullets is the failure of the power cord.
It may be due to some loose wiring or maybe a certain animal choosing to gnaw on it all the time, causing it to have the metal wires exposed and cut.
One of the easiest ways to check to see if your power cord is the problem is to get yourself a voltmeter. Look for the ones with the actual wall plug on them so that you can plug your blender straight into the voltmeter and see if there’s any electricity running through them.
The NutriBullet’s blades are dull
Do blades may oftentimes lead to an overworked motor and ultimately cause the motor to fail.
In order to sharpen them, a sharpening stone is used on the sharpened side of the blade. This will help the blades cut through food more easily and make blending faster and easier.
The NutriBullet’s motor is dead
The NutriBullet’s motor is dead if the blade doesn’t turn when you try to blend. If this happens, check to see if there is any jammed food preventing the blade from turning.
If the NutriBullet won’t turn or is very hard to turn, it’s likely that the motor has overheated. When this happens, the NutriBullet will automatically shut off. To prevent this from happening, be sure to let the NutriBullet cool down for a few hours before using it again.
The NutriBullet’s activators are malfunctioning
There are these little, tiny pieces of plastic that need to be moved over to the side before the motor is allowed to turn on.
You probably wondered why you had to always push the cup into the motor base and turn it to lock it. It isn’t just for locking in your blending vessel. It is also to release the restriction that it has on the motor and allow it to begin spinning.
These are called “blend activators.” If they are stuck or jammed and unable to move, then your motor will likely not work at all until the jam is fixed.
Inside the area where the blender vessel locks into place, try grabbing something small like a toothpick and pushing any debris or bits of pieces out of the way.
The NutriBullet is getting old
Another issue that you might run into is when your NutriBullet is getting old. All electronics end up failing when you give them enough time. Remember, most users have experienced at least five years of successfully using the product. If your NutriBullet is way past five years old or if you have never really properly maintained or kept it clean, then chances are it may end up failing.
In many cases, it is always due to an essential electronic component of the blender no longer working. It may be an easy fix, but unless you know how, it’s probably best just to buy a new one.
Replacement parts and attempting to repair it on the NutriBullet might not be worth the hassle.
The NutriBullet has been running for too long
If you’re one of those people who like to keep your blender running on high for a very long time, then there’s a good chance that your blender will end up feeling a lot sooner and not last as long.
It is recommended that you blend your food for about 30 seconds at a time. Any more than that, and you’re probably putting a lot of stress on the motor itself. The manufacturer also recommends that you run your NutriBullet for up to 60 seconds, but try not to go over.
NutriBullets are powerful machines, but they’re not meant to stay running for long.
Why does my NutriBullet smell like burning?
The most common issue with a burning smell is if the blender is leaking and liquid is getting into the motor while the blender is being used. If you are using your machine and you smell burning, you should turn it off immediately and remove the pitcher.
If you notice that the seal around the bottom is leaking, you may need to have the motor worked on or allow time for it to dry out fully before you try to use it again.
Is the NutriBullet heat resistant?
The NutriBullet is not heat resistant and should not be used to blend hot items. Although it is designed to handle liquids, it may not work properly with warm or hot liquids. This is because the NutriBullet’s motor is not as strong as other commercial blenders and may overheat if used to blend something that is too hot.
The NutriBullet is a powerful blender that can be used to create smoothies, juices, and other recipes.
However, there are some precautions you should take to avoid damaging the machine. The motor can overheat if it runs for longer than 60 seconds at a time. You should also never put the machine in the dishwasher, as this can damage it.
It’s best to take a few precautions to keep the motor cool. Blenders can overheat if they are run for too long or if the motor is not kept cool. To prevent this, you should run your blender for 20 to 40 seconds and then pause it every 60 seconds. This will help keep the motor from overheating and extend the shelf-life of your blender.
Can the NutriBullet smoke?
There has been several recordings where customers have seen blenders begin to smoke. This isn’t necessarily specific to NutriBullets. Smoking may be a sign that the blenders motor is beginning to fail, it’s being overworked, or something else. This can be caused by faulty wiring, residues can lubricants inside the motor better being overheated, or even a Fault In the cooling system.
Can the NutriBullet explode?
The likelihood that your NutriBullet is going to explode is very small. However, there may be issues with hot foods in the blender. That can cause problems.
Another example would be if you were blending hot foods, which is already ill-advised, and the pressure built up while the food was being blended. The built-up pressure and steam can make the lid of the blender dislodge and pop off.
You are not likely to get an actual explosion, but if the blender motor gets wet, it can spark and cause a fire. If you are dealing with any issues, you should unplug the blender and give it a full inspection.
Can you put hot food in the NutriBullet?
You should not put hot liquids in any of the NutriBullet vessels before blending. This can cause the machine to overheat and potentially damage it.
But if you decide to do so anyway, you need to understand the potential dangers. When blending warm or hot ingredients in a NutriBullet, it is important to be aware that doing so can create internal pressure in the sealed blending vessel. If the lid is not properly secured, this pressure can cause the container to erupt and result in thermal injury.
And even if the lid were secure, there’s still a lot of built-up pressure ready to explode once you open the lid.
How long does a NutriBullet last?
According to the manufacturer, NutriBullet blenders are warrantied for one year after you purchase the item.
In many cases, users have benefited from well over five years’ worth of use as long as you take care of your NutriBullet.
It’s important that you follow the manufacturer’s recommendations for cleaning and taking care of your NutriBullet.
How long can you keep a NutriBullet running?
NutriBullets come with incredibly powerful motors. That is to say, the motors can run for quite a while. However, it’s not recommended that you keep the motor running for more than 60 seconds at a time.
While it is definitely possible that your NutriBullet motor can run far beyond 60 seconds, it is actually bad for the motor itself. It may cause the motor to overheat and, in time, cause it to fail.
Most people would recommend that if you blend anything in a NutriBullet, try to blend it for around 30 seconds at a time. Allow the blender to rest for about 5 to 10 seconds, and then do it again if you need to. This will allow the motor to rest and cool back down.
How powerful is a NutriBullet?
As of late, there have been quite a few different versions of the NutriBullet. The original NutriBullet came out with 600 watts of power. and was able to spin its blades up to 10,000 RPM.
It was a much smaller device than it is today. It held cups that were anywhere from 18 oz to 24 oz.
Today’s more modern NutriBullet blenders have up to 1200 watts of power and can hold cups that are as large as 32 oz. This means that the newer and more powerful models of the NutriBullet should be able to spin up to 30,000 RPM, which makes it a breeze to cut through ice.
How to improve the NutriBullet’s performance?
The best thing I would recommend is to look for a NutriBullet with the highest amount of wattage you can find. Keep in mind that the original NutriBullet had only 600 watts of energy powering it. Anything more than that should be enough.
The NutriBullet comes in all types of models, including the original, the NutriBullet Pro, the NutriBullet Pro 1000, all the way up to the NutriBullet Pro+, which carries with it a 1200 watt powered motor.
One way to actually boost the performance of your blend is to make sure that the blades are sharp. Sometimes, when we leave used blenders for very long periods of time, the blades can become dull. When the blades hit the food, it could give the motor a heck of a lot of resistance that may end up hurting the motor in the long run.
Make sure your blades are sharp. If they’re not, you may be able to find replacements on the NutriBullet website. If you would rather not buy any replacement blades, then it is possible to sharpen the blade of your NutriBullet. You just have to be very careful.
Other interesting articles: