I’ve been on the Nutribullet bandwagon for several years now, but I haven’t always loved it.
There were many times my blender won out and smoothies were blended to perfection that day. It wasn’t until recently when I tried blending that everything went wrong with the machine!
The motor started spinning wildly while it still seemed as though there was no liquid coming through.
It was frustrating and I had to ask my friend, who has a Nutribullet Master, what happened. It turns out, this is just an issue that can happen with several of the machines, and it isn’t only exclusive to Nutribullets!
Why is my Nutribullet spinning but not blending?
If your Nutribullet shuts off while blending, it’s likely because you have too much food in the container. When a blender is overfilled, it can cause the motor to heat up and shut off as a safety precaution.
To remedy this, try removing some of the food from the container and see if that allows it to blend properly. Keep in mind that blenders often turn off without warning when they are overloaded, so be sure not to add too many ingredients at once.
The key points in this passage all relate to potential causes of a problem. If your Nutribullet is spinning but not blending, it’s most likely because there isn’t enough liquid or because you have too much food in the container. Be sure not to overload your blender by adding too many ingredients at once!
What could be causing my Nutribullet to spin but not blend?
Too much food packed
There are a few reasons that your Nutribullet might not be working, but the main reason that many people have trouble is that they have put too much into the blender. The blender is only made to fit so much food, and there does need to be space within the canister for the food to move freely and for it to make contact with the blades and actually be blended up. If the bullet is too full, the food is not going to be able to move down to the blades and is not going to be able to be blended.
Check the power cord
Another issue you might be dealing with is the power cord. It may be frayed, it may not be connected properly, or you may have an issue with the socket or the plug itself. It is always beneficial to check the power cord to see if there is an issue.
Check the activator
A Nutribullet works with an activator that is really a button that starts the blender. The activator is a button that when the bullet is placed in correctly and when it is locked, the activator is going to be pressed and it is going to make it so that the blender can actually work. When the activator is damaged or stuck, it is going to be difficult to get the blender to work.
It might be the motor
Still, another issue you might be dealing with is the motor of the blender itself. When the blender is not working well, when it is damaged, or when it is burnt up from being overworked or used too much, it can make it hard for it to work. These motors are delicate. If you work them too much, you can cause them to be damaged and you can actually burn up the motor so that it does not work and so that it does not blende properly.
Check the blades
The last issue you might be dealing with are stuck blades. The blades of your Nutribullet are going to need to be able to freely move and freely spin. If they are damaged, if they are stuck, if they are not working properly, it can cause the blender to not work properly and not run the way that you need it to. If your blades are damaged and not working properly, this can make the entire blender stop working.
What can I do to fix a Nutribullet that is spinning but not blending?
Don’t blend for too long
The first thing that you can do to help make sure your blender is working properly is to take the time to not blend for too long. With a compact blender like a Nutribullet, you want to blend slowly, in short bursts, rather than for long periods of time. This is going to help prevent your motor from getting overworked, it is going to help keep your motor from burning up or overheating, and it is also going to allow you the chance to shake the food that you are blending down so that it has the chance to get to the blades and actually get blended up.
Add more liquid to your blend
Another thing you can do is to take the time to add a little more liquid to the blender. Extra liquid is going to help move the food down and help to blend it up. The added liquid adds a bit of fluidity to the food that is being blended so that your food can blend up fully and so that it can blend totally.
Cleaning the Nutribullet
Cleaning your Nutribullet can also help it work better. Take your blender apart and clean all the parts, clean the blades, the seals, the activator button and more. This is going to help you to get the blender fully cleaned and is also going to help you ensure that there is no stuck food or other issues that might make it hard for the blender to actually do its job.
Check the power cord
You also need to check your power cord. You need to check that it is in good shape and that it is working well also.
Check the lid
You also want to check and make sure the lid is on correctly and that it is also tightly secured. This will keep the blender working and will also help to ensure that there are not going to be any leaks.
Replace the blades
If you are dealing with a blender that is not working well, you can always replace the blades and see if it works. This might be enough to get the blender working again and to get it back in working order.
Send it in for repairs
If that does not work, you can always send it off for repairs. You may be able to send it back to Nutribullet and they may be able to repair it or replace parts that are not working properly.
Buy a new Nutribullet
If all else fails, you may need to get a new blender all together.
How long does the Nutribullet last?
The Nutribullet is designed to not break down or be damaged, and will last for a long time as long as it’s taken care of properly. The warranty lasts for one year, but the Nutribullet can last up to five years if used appropriately.
To use the warranty, you have to provide personal information like your name and contact details. The Nutribullet’s serial number can be found on the bottom of its base and on the receipt showing when you purchased it.
Why did my NutriBullet turn off while blending?
There are a few potential problems that could be causing your blender to not work correctly. The blades may have stopped rotating, there may be water or motor oil leaking, or it simply stopped working during use. Another possibility is that something is wrong with the blade itself.
If the motor stops running, it may be because you used the Nutribullet for too long. Even though you’ve been using the NutriBullet for a long time, you’re not supposed to blend for too long at once. It may damage the motor. Try to blend in less than 1 minute increments at a time. That way, the motor won’t potentially overheat and shut off on its own.
In some cases, restarting the NutriBullet by unplugging it and plugging it back in can solve the problem. If that doesn’t work, try turning it off for one minute and then back on again. If neither of those solutions fixes the issue, you may need to take your NutriBullet apart to diagnose the problem.
Why does my blender smell like it’s burning?
If your blender smells like it’s burning, it might be because of a gasket issue. If you’re blending for too long or not adding enough liquid, your blender will get too hot and start to smell like burning rubber.
Stop blending for three consecutive 1-minute sessions. Make sure you’re using the right liquids, such as water or milk, and not carbonated beverages.
It would also be safe to check the power cord to make sure there’s no damage to the wires. The wires are insulated by plastic, and that may be the source. If you discover that this is the case, stop using your blender immediately. Continue usage of an electronic device with a damaged cord can lead to smoke and fire.
Blenders can sometimes stop working for a variety of reasons. If your blender is smelling like burning rubber and you can’t seem to figure out why, contact the manufacturer for repair assistance.
Why is my blender not spinning?
There are multiple reasons why your blender might not be spinning. The blade might not be tight enough, or there might be something blocking it. You can try to tighten the blade yourself, or you can try to clear any blockages. If that doesn’t work, then you might need to replace the blade or take your blender in for repairs.
The Nutribullet specifically states not to use hot liquids in their blenders. Make sure that you’re only using cold liquids in your Nutribullet and that you’re following all of the instructions carefully. If you’re still having problems, then contact customer service for more help.
Magic Bullet blenders are known for the quality of their blades and base gears. If your blades aren’t turning, then it’s possible that those gears have gone bad and need to be replaced. There are a number of accessories available from Magic Bullet to upgrade your blender’s performance, such as blades and a range of attachments.
How long does the NutriBullet motor last?
The Nutribullet motor is designed to last for many years with proper use. In fact, the blades and motor can last up to 5 years!
However, if you notice that your Nutribullet isn’t blending as well as it used to or the motor has stopped working completely, there is a workaround. You can blend in one-minute increments instead of continuously for too long. This will help preserve the life of your Nutribullet and ensure that you continue to enjoy its many benefits.
Can you reset a NutriBullet?
If your NutriBullet isn’t working properly, you may be able to reset it if that’s even an option that’s available on your model.
You can follow the steps below to try and reset the blender.
- Unplug the blender’s power from the wall.
- Wait for an hour.
- Check to see if there is any blockage that prevents the activated from depressing.
- Clean the inside of the base and remove any food particles left inside.
- Plug the power base back in.
- It should start working now.
Unplugging the power base will reset the device and prevent further damaging heat buildup.
The NutriBullet won’t work if the motor coils heat up above 150 degrees Celsius (302 degrees Fahrenheit). If the motor coils are overheating, you might smell hot metal or burning electrical components, and there’s a good chance that one component has failed. Diagnosing electrical problems with the NutriBullet’s motor will require disassembly.
What is the best NutriBullet to get?
When it comes to NutriBullets, there are a few different options to choose from. The 600 Series is the best for most people because it offers the right balance of power and volume. If you want something with a bit more power, then the 900 Series is a good option. And finally, if you’re looking for NutriBullet’s first smart nutrition system, then the Balance is worth checking out. But keep in mind that it’s not as powerful as the other two options mentioned in this passage.
- Effortlessly pulverizes fruits, vegetables, superfoods, protein shakes, green smoothies, seeds, keto
- Powerful high-torque 1000-watt motor with auto shut off feature after optimum nutrient extraction
- Easy to clean and dishwasher safe. product is manufactured in compliance with us & canadian electric
- This exclusive kit come with the powerful 1000-watt high torque power base with auto shut off smart
- The 28oz insulated stainless steel cup keeps smoothie or shake cold for up to 8 hours
- Powerful: 1200-watt motor
- Pre-programmed: pulse cycle with automatic shut-off
- High torque power base
- Hands-free auto-off for optimal extraction
- Included: (1) 1200w motor base, (1) extractor blade, (1) 32 oz cup, (1) 24 oz cup, (2) to-go lid, (2
- Nutribullet blender is the ultimate cooking companion, with multiple speeds blend up any recipe, bot
- Three precision speeds, and pulse function offer you full control at the press of a button. 1200w of
- Includes: (1) 1200 watt motor base, (1) 64 oz blender pitcher with lid and vented lid cap, (1) tampe
- The nutribullet blender blade is made of powerful stainless steel and designed with cyclonic action.
- Hassle-free cleaning - simply place pitcher in the dishwasher.
- This item includes a 1 year limited warranty.
- Unit dimensions: 7.75 l x 8.07 w x 16.101
- Note: refer to user manual before use
- Product built to north american & canadian electrical standards