Keurig wont stop pumping water - FamilyGuideCentral.com
| |

My Keurig Won’t Stop Pumping Water (What To Do!)

I love my Keurig. It’s the perfect cup of coffee, every single time.

But yesterday, it started doing something very strange. I went to make a cup of coffee, and when I pulled the lever down to start brewing, all that came out was water.

I thought maybe I had put too much in or something, so I tried again—but still just water. And again—still just water!

So I called customer service and was told that this is actually a common problem with Keurig machines: sometimes they pump a whole bunch of water from the reservoir and then don’t stop until you pull the plug out of the wall socket!

What is the Keurig Pumping Problem?

If you’ve ever had to deal with the Keurig Pumping Problem, you know it’s not fun.

It’s a problem that starts when your Keurig machine doesn’t stop pumping water after you have stopped using it.

This can be caused by incorrect settings or misplaced reservoir magnets, and can be solved by doing the necessary changes to the machine, or by contacting the service center.

Why does the Keurig Pumping Problem occur?

There could be a number of reasons for the Keurig Pumping Problem.

Sometimes it’s likely due to a malfunction in the software that causes the water pump to keep going without stomping.

Other times, it can be something physical that has caused your Keurig to keep pumping Non-Stop.

While the true reason to the issue might be a mystery, the best thing to start doing right away is pulling the plug from your Keurig so that it doesn’t pump any more water.

The Keurig Pumping Problem can also be caused by different factors such as coffee grounds getting into the machine, a poorly brewed cup of coffee, and the machine shutting down on its own.

How can the Keurig Pumping Problem be solved?

There may be some ways that you can help fix this problem on your own.

Here are a few tips that can help you solve the issue.

  • If the Auto Off feature is turned on, try to disable it.
  • Check to see if the reservoir magnet is misplaced and make the necessary changes.
  • If the problem still persists, then contact the service center.
  • The Keurig Pumping Problem can occur when the system is turning on and off on its own.
  • The Keurig Pumping Problem can also occur when the system is less than effective in processing coffee.
  • The Keurig Pumping Problem can also occur when there is a blue light blinking in the water reservoir section.

How can I prevent the Keurig Pumping Problem from occurring?

Generally, you would want to keep your Keurig clean and continue to maintain it as usual.

You can do such things as descaling your Keurig every four to six months as recommended.

Make sure that your access and all the parts on your Keurig are securely fit in.

Keep it in one place and avoid moving it around too much to limit the amount of accidents it can be involved in.

What should I do if the Keurig Pumping Problem occurs?

Unplug the Keurig to turn it off and leave it alone for a few minutes

If your Keurig is not pumping correctly, the best thing you can do is unplug it and give it a few minutes to cool down.

This will allow any steam or heat from the water to dissipate, and it’s a good idea to give it time for any pressure built up in the pump to release as well.

Once you’ve given your machine a few minutes, plug it back in and see if that fixes the problem!

Make sure the needle is clean and unclogged

If the Keurig is pumping too much water and you can’t stop it from filling, you may need to clean the needle.

Make sure the needle is clean and unclogged, then run a few more cups of water through it.

The tests you can try.  just run a cycle of water through your Keurig and let it empty into a clear glass cup. That way you can see if there are any particles that break loose into the cup.

After that, you can try to descale your brewer if you see evidence of clogging inside the system.

Try to descale your brewer

Descaling is a process that will remove calcium and magnesium deposits from the brewer’s internal components.

Calcium and magnesium can build up in your brewer over time, causing clogs and other problems.

If you have not descaled it recently, this is likely what caused your issue.

By descaling your brewer, you can prevent issues from happening in the future.

Check the magnetic sensor on the reservoir tank

The magnet sensor tells your Keurig whether or not the paint is running out of water.

This could be the very reason why your pump continues to try and push water through.

If the sensor is malfunctioning, then it’s possible that your pump may try to overcompensate by pumping even more water into the Keurig.

Turn the machine upside down and spank it

If your Keurig is pumping and not pumping, try turning it upside down and spank it a few times.

It may seem scary, and you might be afraid that it can break your Keurig machine oh, but there have been several reports that this actually works really well and it fixes a lot of problems.

There may be something stuck in the pump, so this should dislodge it. If that doesn’t do the trick, you may need to take apart your machine and clean out the inside.

Call customer service for repair

If you’re down to your last straw and you’ve done everything you can to stop the Keurig pumping problem, don’t panic!

Just call customer service and we’ll get you started on the repair process.

What are the signs that my Keurig is having pumping problems?

It’s important to know what the real problem is when dealing with your Keurig.

When you have a Keurig pumping problem, you’ll likely hear the pump noise continue to run even after your cup of tea is made.

You might also see that water continues to pour out of your Keurig long after your cup of coffee is done.

How can I contact Keurig customer service if I have the Keurig Pumping Problem?

If you are having problems with your Keurig Coffee Maker, then you can contact the Keurig customer service team by phone, email, or regular mail.

The customer service team is experienced in fixing Keurig’s and will definitely be able to help you.

The customer service team is friendly and does their job well.

You can contact Keurig customer service by calling 1-866-901-2739 or by visiting their website at support.keurig.com.

If you have a question about your product, you can visit their website and submit a support ticket.

You can also email them on their contacts website here.

After calling them, you’ll need to submit a support ticket. The Keurig team will follow up with some troubleshooting advice and if that doesn’t work, they will create a return order for your Keurig.

Other interesting articles: